Non-Metallic Moisture Proof NEMA 6P (IP67) Box - Model ZB-5-QC Includes DRTB-T-2 Terminal BLock. Use as end of line box for CTM series modules. Not recommended for use in direct...

Protectowire 10" Alarm Bell - Model MBA-10-24 24VDC 13.5mA 87 dBA @ 10' UL / FM / CSFM Listed

Protectowire 6" Alarm Bell - Model MBA-6-24 24VDC 13.5mA 87 dBA @ 10' UL / FM / CSFM Listed

Protectowire 8" Alarm Bell - Model MBA-8-24 24VDC 13.5mA 87 dBA @ 10' UL / FM / CSFM Listed

Protectowire Back Box (Red) - Model BB

Protectowire Cable Mount - Model EMS-A-CO Note:  Requires Sikaflex Adhesive (Model 501559) Used when drilling into mounting surfaces is prohibited or not possible such as transformer services.   The adhesive mounting...

Protectowire  EPC 220F/105C Linear Heat Detection Wire - Model PHSC-220-EPC & PHSC-220-EPC-M 500' Roll EPC linear Protectowire is perfect for multi-purpose, commercial and light industrial applications. Temperature:    220F/105C Options:...

Protectowire EPC 280F/138C Heat Detection Wire - Model PHSC-280-EPC & PHSC-280-EPC-M 500' Roll EPC linear Protectowire is perfect for multi-purpose, commercial and light industrial applications. Temperature:    280F/138C Options: PHSC-280-EPC...

Protectowire Weather-Proof Back Box - Model WPSBB-R For RSSWP

Protectowire Weatherproof Back Box With Gasket - Model WBB

Protectowire #2228 Tape Sealant for Splice Connectors - Model SFTS 1" x 10' makes approximately 30 splices SFTS Tape is used to seal all splices of the Protectowire linear heat...

Protectowire #35 Splicing Tape - Various Models Based on Color #35 splicing tape is used to protect all splices of the Protectowire linear heat detector after sealing against moisture using...

Protectowire 304 Stainless Steel "J" Clip with 1/4" Hole - Model JD-1 Compatible with all Protectowire linear heat detection. Temperature:   -76F - 572F (-60C-300C) Insertion Force:   Apprx. 2-3 lbs. Mounting...

Protectowire 4 Zone Fire Alarm/Releasing Panel - Model SRP-4x4 Multipurpose fire alarm panel designed for commercial and light industrial applications.   The SRP 4 x 4 control panel incorporates many optional...

Protectowire 4 Zone Fire Alarm/Releasing Panel W/ Alarm Meter - Model SRP-4x4M Multipurpose fire alarm panel designed for commercial and light industrial applications.   The SRP 4 x 4 control panel...

Protectowire Acrylic Break Rods - Model SG-GR (Pack of 12)

Protectowire Alarm Point Location Meter Adapter - Model APL-90 Converts almost any digital multimeter into an alarm point location meter.   Allows the general actuated (shorted) area of Digital PHSC Protectowire...

Protectowire Alarm Relay Board - Model RB-4 Includes 4) SPDT Relays (Field Installed)

Protectowire Amplified Speaker W/O Tone Card - Model ASHP-24SMR 24VDC, .55 amps 94 dBA @ 10' UL / CSMF Listed

Protectowire Battery Cabinet - Model E-.5 Use with 18AH size batteries. Color:  Red Dimensions:    20"W x 12"H x 7"D Accepts Battery Sizes PS-12180, PS-12330 and PS-12400

Protectowire Battery Cabinet - Model G-.5 Use with 12AH size batteries. Color:  Red Dimensions:    12.25"W x 7.125"H x 4.5" D Accepts Battery Sizes PS-1270, PS-6100

Protectowire Beam Clamps - Models BC-2, BC-3P & BC-3N Model BC-2 - Beam Clamp Assembly (Steel) - General Indoor Use  Model BC-3P - Iron Zinc Plated Beam Clamp Assembly (with...

Protectowire Cable Tie For EMS-A-CO - Model PLT1S-CO

Protectowire Cable Tray Mounting Clip Assembly   These clips consist of a "caddy" style steel clamp, WAW and snap button.   They are designed to attach to the cable tray side rails...

Protectowire Cable Tray Clip - Various Models The CC-10 Series cable tray clips will accommodate a material thickness of up to .50 inch (12.7 mm) and also provide a means...

Protectowire Corner Clips - White (WAW-N) or Clear (WAW-P) WAW-N Corner Clip, White Nylon (501359) WAW-P Corner Clip, Clear Polypropylene (500127) 500128 Snap Button for WAW-N or WAW-P

Protectowire CTI 155F/68C Linear Detection Wire - Models CTI-155 & CTI-155-M (500' Roll) Vinyl Jacket Designed for interior commercial and industrial applications.   Features of this jacket include low moisture absorption,...

Protectowire CTI 190F/88C Linear Detection Wire - Models CTI-190 & CTI-190-M (500' Roll) Vinyl Jacket Designed for interior commercial and industrial applications.   Features of this jacket include low moisture absorption,...

Protectowire CTI 220F/105C Linear Detection Wire - Models CTI-220 & CTI-220-M (500' Roll) Vinyl Jacket Designed for interior commercial and industrial applications.   Features of this jacket include low moisture absorption,...

Protectowire CTI 280F/138C Linear Detection Wire - Models CTI-280 & CTI-280-M (500' Roll) Vinyl Jacket Designed for interior commercial and industrial applications.   Features of this jacket include low moisture absorption,...

Protectowire CTI 356F/180C Linear Detection Wire - Models CTI-356 & CTI-356-M (500' Roll) Vinyl Jacket Designed for interior commercial and industrial applications.   Features of this jacket include low moisture absorption,...

Protectowire CTI Connection/Terminal Block - Model DRTB-T-2 With Test Jack

Protectowire CTI Interface Module With Display  & Navigation Buttons (Less Enclosure) - Model CTM-530 The CTI linear heat detection control module continuously monitors the detection line's continuity.   In the case...

Protectowire CTI Interface Module With Display, Navigation Buttons & NEMA 4X Enclosure - Model CTM-530E The CTI linear heat detection control module continuously monitors the detection line's continuity.   In the...

Protectowire CTI Splicing Kit - Model CTIC Complete with Connectors

Protectowire CTI-X 155F/68C Linear Detection Wire - Models CTI-155X & CTI-155X-M (500' Roll) Fluoropolymer Jacket Designed for all exterior environments as well as harsh interior applications.   Features of this low...

Protectowire CTI-X 190F/88C Linear Detection Wire - Models CTI-190X & CTI-190X-M (500' Roll) Fluoropolymer Jacket Designed for all exterior environments as well as harsh interior applications.   Features of this low...

Protectowire CTI-X 220F/105C Linear Detection Wire - Models CTI-220X & CTI-220X-M (500' Roll) Fluoropolymer Jacket Designed for all exterior environments as well as harsh interior applications.   Features of this low...

Protectowire CTI-X 280F/138C Linear Detection Wire - Models CTI-280X & CTI-280X-M (500' Roll) Fluoropolymer Jacket Designed for all exterior environments as well as harsh interior applications.   Features of this low...

Protectowire CTI-X 356F/180C Linear Detection Wire - Models CTI-356X & CTI-356X-M (500' Roll) Fluoropolymer Jacket Designed for all exterior environments as well as harsh interior applications.   Features of this low...

Protectowire CTI-XLT 135F/57C Linear Detection Wire - Models CTI-135XLT & CTI-135XLT-M (500' Roll) Vinyl Polymer Jacket Made specifically for cold storage and freezer applications: Outer jacket withstands the harsh environments...

Protectowire Dual Class A Output Module - Model AM-91-2 Field Installed.

Protectowire End Of Line Fiberglass NEMA-4X Enclosure - Model ELR-HD-1A-QC (N4X) Includes test switch and Comp. Terminals, 8.2K Resistor

Protectowire EPC 155F/68C Heat Detection Wire - Model PHSC-155-EPC & PHSC-155-EPC-M EPC linear Protectowire is perfect for multi-purpose, commercial and light industrial applications. 500' Roll Temperature:    155F/68C Options: PHSC-155-EPC...

Protectowire EPC 190F/88C Linear Heat Detection Wire - Model PHSC-190-EPC & PHSC-190-EPCM 500' Roll EPC linear Protectowire is perfect for multi-purpose, commercial and light industrial applications. Temperature:    190F/88C Options:...

Protectowire  EPC 356F/180C Linear Heat Detection Wire  - Model PHSC-356-EPC & PHSC-356-EPC-M 500' Roll EPC linear Protectowire is perfect for multi-purpose, commercial and light industrial applications. Temperature:    356F/180C Options:...

Protectowire Fault Locator System - Model MFL-92 Allows an actuated (shorted) point of Digital PHSC or CTI detectors to be accurately located.   A signal generator is connected across the detector. ...

Protectowire FEP Thermocouple Extension Wire - Model PWTX-200 200' Spool (60m) FEP Thermocouple Extension Wire 20 AWG For Non-Classified Hazards Only

Protectowire FEP Thermocouple Extension Wire - Model PWTX-200 500' Spool (60m) FEP Thermocouple Extension Wire 20 AWG For Non-Classified Hazards Only

Protectowire Fiberglass NEMA-4X (IP66) Junction Box - Model ZB-HD-4-QC Heavy Duty With PWSC Compression Terminals Dimensions:   6" H x 6" W x 4" Deep

Protectowire Fiberglass NEMA-4X End Of Line Box - Model ELR-HD-10-QC With Test Switch & PWSC Compression Terminals. 10K Compatible with PIM Interface Modules 

Protectowire Fiberglass NEMA-4X End Of Line Box - Model ELR-HD-4-QC Heavy Duty With Test Switch & PWSC Compression Terminals.  Compatible With FS-2000 and 2600HD ZM-3234 Modules (4.7K Resistor)

Protectowire Field Serviceable Splicing Connector Kit - Model PWSK-3 The PWSK-3 connector kit provides terminal connections, threaded assembly and built in strain relief connectors to provide watertight/oil tight seals that...

Protectowire Flexible Leads - Model PFL (500572)

Protectowire Heavy Duty Fiberglass NEMA-4X (IP66) Junction Box - Model ZB-HD-5-QC Includes DRTB-T-2 Terminal Block. Use as End of Line Box for CTM series modules.

Protectowire Industrial Adhesive For EMS-A-CO Mounts - Model SIKAFLEX-291 This product should not be used in chemically harsh environments or areas where temperatures are less than -40 Deg F or...

Protectowire Insulated Standoff - Model TR-5G Used to install Protectowire on or above coal conveyors or from other applicable mechanical structures.   The standoffs can be installed through holes in covers...

Protectowire Line Clip - Model OHS-1 & OHS-SS OHS clips are used mainly as an intermediate fastener between corner mounted WAW clips which provide the main support. Use with EPR,...

Protectowire Manual Station - Model SGX-32SK1 Double Action Explosion Proof/Weatherproof NEMA-4X Manual Station with DPDT Switch & Back Box UL Listed / FM Approved

Protectowire Manual Station - Model SGX-32SK2 Single Action Explosion Proof/Weatherproof NEMA-4X Manual Station with DPDT Switch & Back Box UL Listed / FM Approved

Protectowire Messenger Wire Eye Bolt  Model TR-4A (Eyebolt) Model TR-4A-S (Eyebolt 304 Stainless Steel)  

Protectowire Mounting Clip (Single Piece) - Model HPC-2 This single piece UV resistant nylon clip consists of a special snap-lock design.  This allows for easy installation or removal of the...

Protectowire Non-Metallic Moisture Proof NEMA Box - Model ZB-4-QC-MP With PWSC Compression Terminals.  Compatible with all controls. Note:  Not recommended for use in direct sunlight.

Protectowire Non-Metallic Strain Relief Connector - Model SR-502-N